High and low temperature falling ball testing machine

High and low temperature falling ball testing machine

The main purpose
  • Suitable for falling ball impact test on various plastic films and sheets. This product complies with GB / T9639 "Test method for impact resistance of plastic films and sheets" Standard Test Method for Dart Impact ", Requirements for Test Equipment.
  • This machine puts the test product on a test surface in a high and low temperature environment. The fixed weight steel ball is freely dropped on the product from the prescribed drop height, and the product is impacted. Then the product appearance and all aspects of performance are applicable to plastic, Impact strength test of ceramic, acrylic, glass, lens, hardware and other products.
model T-300PF-D
A:0℃~+150℃ B:-20℃~+150℃ C:40℃~+150℃ E:-70℃~+150℃
Test chamber size W × D × H cm 90×96×55
Dimensions W × D × H cm 1260×1026×1300
temperature range -40 ℃ ~ normal temperature range optional
Temperature deviation Temperature: ± 1.0 ℃
Drop distance 20CM
Ball diameter Optional
Landing time +20℃→﹣20℃≤30min +20℃→﹣40℃≤40min
material Texture Outer box: anti-rust treatment cold-rolled steel plate spray inner box: SUS ≠ 304 or SUS ≠ 316 stainless steel plate
Insulation Materials Rigid polyurethane foam (with flame retardant)
Controller Imported TEMI series 7 touch temperature and humidity meter
Cooling method Imported Taikang compressor + finned copper evaporator + air-cooled condenser
error alarm Compressor overcurrent, overpressure, overheating, water shortage, no air-to-air incineration of heater, leakage protection, overtemperature protection, under-phase
Option Cold light board, fixture bracket, infrared aiming probe
Dongguan HAOTIAN Testing Equipment Co., LTD. Copyright © 2019 all rights reserved 【Admin】